My 50 year old boiler is making a loud buzzing sound from an electric box on the front of the boiler. Read on.? - labeled parts of an electric motor
After opening the box about 5 "x 5"), some cables (and what looks like a small electric motor.
connected to the engine is what looks like a small square of metal, making the noise vibrates.
He is very strong.
No marking, writing or markings to tell me what this part of the boiler.
Ideas?
Sunday, February 21, 2010
Labeled Parts Of An Electric Motor My 50 Year Old Boiler Is Making A Loud Buzzing Sound From An Electric Box On The Front Of The Boiler. Read On.?
Subscribe to:
Post Comments (Atom)
1 comments:
What you describe looks like a switch. This is used to activate and deactivate the power of your furnace. Contactors are controlled by a switch from low-voltage lines. Contactors are used to reduce sparking when the computer is turned on and off. If the low-voltage lines, which are driven by the circulation that the tension between creating an electromagnet at the PEG site (coils) that you described. Somewhere on the field coil, a series of contacts, should be drawn, closed by the magnetic force power control cables, low voltage. The use of electromagnets to connect them and disconnect much quicker than a human finger can be a switch that arcing in the contacts, which have jumped back and reduces pressing the next. Now, forsolve the problem. (I hope is) what I think you should try. Turn the power of the contactors (high and low voltage). Once the device is off, take a piece of emery cloth or sandpaper and gently buff the end of the contact until all waste is disposed of. Most Discussed you hear is probably the poor contact caused by such waste. All together again, and they will again. If the problem persists, then you need to replace the contactor. Good luck.
Post a Comment